Welcome back to E&R Industrial - your premier industrial supply chain partner!
0 Items
Category
Brands
Ball End Mills
Ball end mills are used for drilling shallow holes, slotting a channel where a flat bottom is not required or most commonly used to produce multi-dimensional contours in molds or dies.

6165 Results

Items Per Page
GARR 04570 990M Ball End Center Cutting Stub Length End Mill, 4 mm Dia Cutter, 8 mm Length of Cut, 4 Flutes, 4 mm Dia Shank, 50 mm OAL

GARR 04570 990M Ball End Center Cutting Stub Length End Mill, 4 mm Dia Cutter, 8 mm Length of Cut, 4 Flutes, 4 mm Dia Shank, 50 mm OAL

Manufacturer: Garr Tool Company
Brand: GARR
Part #: GRT-04570
MPN: 04570
UOM: PC
Pack contains: PC=1
Cleveland® C42645 HGC-2B Ball Nose Center Cutting General Purpose Single End End Mill, 3/16 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-3/8 in OAL, Uncoated

Cleveland® C42645 HGC-2B Ball Nose Center Cutting General Purpose Single End End Mill, 3/16 in Dia Cutter, 1/2 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2-3/8 in OAL, Uncoated

Manufacturer: Walter Surface Technologies
Brand: Cleveland®
Part #: CTD-C42645
MPN: C42645
UOM: PC
Pack contains: 1/PK
GARR 04050 190M Ball Nose Center Cutting Stub Length End Mill, 1/8 in Dia Cutter, 1/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

GARR 04050 190M Ball Nose Center Cutting Stub Length End Mill, 1/8 in Dia Cutter, 1/4 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL

Manufacturer: Garr Tool Company
Brand: GARR
Part #: GRT-04050
MPN: 04050
UOM: PC
Pack contains: PC=1
SGS® 30474 03B Ball Nose End Fractional End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN

SGS® 30474 03B Ball Nose End Fractional End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN

Manufacturer: KYOCERA SGS Precision tools, Inc.
Brand: SGS®
Part #: SGS-30474
MPN: 30474
UOM: PC
Pack contains: PC=1
SGS® 09522 M3B Long Reach Length Ball End Mill, 0.075 in Dia Cutter, 0.113 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 2-1/2 in OAL, Uncoated

SGS® 09522 M3B Long Reach Length Ball End Mill, 0.075 in Dia Cutter, 0.113 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 2-1/2 in OAL, Uncoated

Manufacturer: KYOCERA SGS Precision tools, Inc.
Brand: SGS®
Part #: SGS-09522
MPN: 09522
UOM: PC
Pack contains: 1/PK
California residents
SGS® 02524 M2B Ball Nose End Fractional Micro End Mill, 0.062 in Dia Cutter, 0.093 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN

SGS® 02524 M2B Ball Nose End Fractional Micro End Mill, 0.062 in Dia Cutter, 0.093 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN

Manufacturer: KYOCERA SGS Precision tools, Inc.
Brand: SGS®
Part #: SGS-02524
MPN: 02524
UOM: PC
Pack contains: PC=1
SGS® 02606 M4B Ball Nose End Fractional Micro End Mill, 0.041 in Dia Cutter, 0.123 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN

SGS® 02606 M4B Ball Nose End Fractional Micro End Mill, 0.041 in Dia Cutter, 0.123 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN

Manufacturer: KYOCERA SGS Precision tools, Inc.
Brand: SGS®
Part #: SGS-02606
MPN: 02606
UOM: PC
Pack contains: 1/PK
GARR 03250 Ball End Center Cutting Single End Stub Length End Mill, 0.01 in Dia Cutter, 0.015 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated

GARR 03250 Ball End Center Cutting Single End Stub Length End Mill, 0.01 in Dia Cutter, 0.015 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated

Manufacturer: Garr Tool Company
Brand: GARR
Part #: GRT-03250
MPN: 03250
UOM: PC
Pack contains: 1/PK
GARR 04040 190M Ball End Center Cutting Single End Stub Length End Mill, 3/32 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated

GARR 04040 190M Ball End Center Cutting Single End Stub Length End Mill, 3/32 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated

Manufacturer: Garr Tool Company
Brand: GARR
Part #: GRT-04040
MPN: 04040
UOM: PC
Pack contains: PC=1
GARR 03110 180M Ball End Center Cutting Single End Stub Length End Mill, 3/8 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2 in OAL, Uncoated

GARR 03110 180M Ball End Center Cutting Single End Stub Length End Mill, 3/8 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 2 in OAL, Uncoated

Manufacturer: Garr Tool Company
Brand: GARR
Part #: GRT-03110
MPN: 03110
UOM: PC
Pack contains: PC=1
SGS® 03075 M4B Ball Nose End Fractional Micro End Mill, 0.014 in Dia Cutter, 0.021 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN

SGS® 03075 M4B Ball Nose End Fractional Micro End Mill, 0.014 in Dia Cutter, 0.021 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, AlTiN

Manufacturer: KYOCERA SGS Precision tools, Inc.
Brand: SGS®
Part #: SGS-03075
MPN: 03075
UOM: PC
Pack contains: 1/PK
SGS® 03865 Micro M3B Imperial Long Reach Neck Ball Nose End Mill, 0.035 in Dia Cutter, 0.053 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 2-1/2 in OAL, AlTiN

SGS® 03865 Micro M3B Imperial Long Reach Neck Ball Nose End Mill, 0.035 in Dia Cutter, 0.053 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 2-1/2 in OAL, AlTiN

Manufacturer: KYOCERA SGS Precision tools, Inc.
Brand: SGS®
Part #: SGS-03865
MPN: 03865
UOM: PC
Pack contains: 1/PK
California residents
Showing 1 - 12 of 6165 entries

back To Top