Chicago-Latrobe® 53650 190C-TN Silver & Deming Drill, 25/32 in Drill - Fraction, 0.7812 in Drill - Decimal Inch, 1/2 in Shank, M42 HSS-Co 8
Chicago-Latrobe® 53650 190C-TN Silver & Deming Drill, 25/32 in Drill - Fraction, 0.7812 in Drill - Decimal Inch, 1/2 in Shank, M42 HSS-Co 8
| Applicable Materials | : | Alloy Steel, Carbon Steel and Cast Iron |
| Cutting Depth | : | 3-1/8 in |
| Cutting Direction | : | Right Hand |
| Cutting Edge Material | : | M42 HSS-Co 8 |
| Drill Size - Decimal Inch | : | 0.7812 in |
| Drill Size - Fraction | : | 25/32 in |
| Finish | : | TiN |
| Flute Length | : | 3-1/8 in |
| Flute Type | : | Spiral |
| Material | : | M42 HSS-Co 8 |
| Number of Flutes | : | 2 |
| Overall Length | : | 6 in |
| Point Angle | : | 118 deg |
| Point Type | : | Split |
| Series | : | 190C-TN |
| Shank Size | : | 1/2 in |
| Shank Type | : | Reduced |
The cobalt Silver & Deming drills feature 1/2" shanks, 118° split points, and a straw or TiN finish for enhanced durability in abrasive materials, with a standardized 6" length that ensures rigidity, accuracy, and easy tool changes.
Chicago-Latrobe® Silver & Deming Drill, Series: 190C-TN, 25/32 in Drill - Fraction, 0.7812 in Drill - Decimal Inch, 6 in Overall Length, 3-1/8 in Cutting Depth, 2 Flutes, Spiral Flute, 3-1/8 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Split Point, Right Hand Cutting Direction, M42 HSS-Co 8 Cutting Edge, M42 HSS-Co 8, TiN, Applicable Materials: Alloy Steel, Carbon Steel and Cast Iron
- Tip coated with TiN for a super hard surface with high lubricity
- Made with premium grade cobalt HSS to drill harder materials
- 118 conventional point for rapid penetration
- Cobalt drills can drill approximately 30% faster than HSS drills