Welcome back to E&R Industrial - your premier industrial supply chain partner!
Chicago-Latrobe® 68881 120DH Taper Length Drill, #41 Drill - Wire, 0.096 in Drill - Decimal Inch, 4-5/8 in OAL, HSS, Uncoated
Chicago-Latrobe® 68881 120DH Taper Length Drill, #41 Drill - Wire, 0.096 in Drill - Decimal Inch, 4-5/8 in OAL, HSS, Uncoated
Manufacturer: Walter Surface Technologies
Brand: Chicago-Latrobe®
Part #: CHI508-68881
MPN: 68881
CPN:
| Applicable Materials | : | Low Carbon Steel, Soft Alloy Steel and Non-Ferrous Metals |
| Cutting Depth | : | 3-1/8 in |
| Cutting Direction | : | Right Hand |
| Cutting Edge Material | : | HSS |
| Drill Size - Decimal Inch | : | 0.096 in |
| Drill Size - Wire | : | #41 |
| Finish | : | Uncoated |
| Flute Length | : | 3-1/8 in |
| Flute Type | : | Parabolic |
| Material | : | HSS |
| Overall Length | : | 4-5/8 in |
| Point Angle | : | 135 deg |
| Point Type | : | K-Notch |
| Series | : | 120DH |
| Shank Size | : | 0.096 in |
| Shank Type | : | Tanged |
Chicago-Latrobe® Taper Length Drill, Series: 120DH, #41 Drill - Wire, 0.096 in Drill - Decimal Inch, 4-5/8 in Overall Length, 3-1/8 in Cutting Depth, Parabolic Flute, 3-1/8 in Flute Length, 0.096 in Shank, Tanged Shank, 135 deg Point, K-Notch Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Low Carbon Steel, Soft Alloy Steel and Non-Ferrous Metals
- Parabolic flute configuration with proprietary Convolute flute design offers wider flute space, dispersing chips away from the cutting edges more rapidly and increasing coolant flow
- Engineered for deep hole drilling up-to 8 to 12 X diameter depth, depending on drill diameter
- Manufactured from premium high speed steel
- 135 deg K-notch split point is self-centering and uses reduced thrust for easier penetration
- Bright finish provides good chip ejection