Chicago-Latrobe® 69017 150DH Deep Hole Jobber Length Drill Bit, #17 Drill - Wire, 0.173 in Drill - Decimal Inch, 135 deg Point, HSS, Uncoated
Chicago-Latrobe® 69017 150DH Deep Hole Jobber Length Drill Bit, #17 Drill - Wire, 0.173 in Drill - Decimal Inch, 135 deg Point, HSS, Uncoated
| Applicable Materials | : | Low Carbon Steel, Non-Ferrous Metals and Soft Alloy Steel |
| Cutting Depth | : | 2-3/16 in |
| Cutting Direction | : | Right Hand |
| Cutting Edge Material | : | HSS |
| Drill Diameter Measurement System | : | Imperial |
| Drill Size - Decimal Inch | : | 0.173 in |
| Drill Size - Wire | : | #17 |
| Finish | : | Uncoated |
| Flute Length | : | 2-3/16 in |
| Flute Type | : | Parabolic/Right Spiral |
| Material | : | HSS |
| Number of Flutes | : | 2 |
| Overall Length | : | 3-3/8 in |
| Point Angle | : | 135 deg |
| Point Type | : | Split |
| Series | : | 150DH |
| Shank Size | : | 0.173 in Dia x 1.1875 in L |
| Shank Type | : | Straight |
| Through Coolant (Yes/No) | : | No |
| Type | : | Deep Hole |
The CHICAGO-LATROBE 150DH is a deep-hole drill featuring a parabolic Convoflute design for efficient chip evacuation and enhanced coolant flow, engineered for drilling up to 12x diameter with a 135° split point and available in durable TiN or bright finishes.
Chicago-Latrobe® Jobber Length Drill Bit, Deep Hole, Series: 150DH, Imperial, #17 Drill - Wire, 0.173 in Drill - Decimal Inch, 3-3/8 in Overall Length, 2-3/16 in Cutting Depth, 2 Flutes, Parabolic/Right Spiral Flute, 2-3/16 in Flute Length, 0.173 in Dia x 1.1875 in L Shank, Straight Shank, 135 deg Point, Split Point, Right Hand Cutting Direction, HSS Cutting Edge, No Through Coolant, HSS, Uncoated, Applicable Materials: Low Carbon Steel, Non-Ferrous Metals and Soft Alloy Steel
- Bright finish adds lubricity and is ideal for drilling in non-ferrous materials like aluminum
- Self centering 135 split-point for reduced thrust requirements and minimized walking