Cle-Line® C22991 1898 Jobber Length Drill Bit, W Drill - Letter, 0.386 in Drill - Decimal Inch, 118 deg Point, HSS, Uncoated
Cle-Line® C22991 1898 Jobber Length Drill Bit, W Drill - Letter, 0.386 in Drill - Decimal Inch, 118 deg Point, HSS, Uncoated
| Applicable Materials | : | Alloy Steel, Carbon Steel, Low Carbon Steel, Gray Cast Iron, Nodular Cast Iron and Aluminum |
| Cutting Depth | : | 5XD |
| Cutting Direction | : | Right Hand |
| Cutting Edge Material | : | HSS |
| Drill Diameter Measurement System | : | Imperial |
| Drill Size - Decimal Inch | : | 0.386 in |
| Drill Size - Letter | : | W |
| Finish | : | Uncoated |
| Flute Length | : | 3-3/4 in |
| Flute Type | : | Right Spiral |
| Material | : | HSS |
| Number of Flutes | : | 2 |
| Overall Length | : | 5-1/8 in |
| Point Angle | : | 118 deg |
| Point Type | : | Radial |
| Series | : | 1898 |
| Shank Size | : | 0.386 in Dia x 1.375 in L |
| Shank Type | : | Straight |
| Through Coolant (Yes/No) | : | No |
The CLE-LINE 1898 Maintenance jobber drill is designed for general-purpose. It features a 118° standard point for smooth, controlled starts in mild steels, cast iron, and other non-hardened materials. The bright finish reduces friction and promotes clean chip evacuation during drilling. NOTE: For Reduced Shank see Style #1900.
Cle-Line® Jobber Length Drill Bit, Series: 1898, Imperial, W Drill - Letter, 0.386 in Drill - Decimal Inch, 5-1/8 in Overall Length, 5XD Cutting Depth, 2 Flutes, Right Spiral Flute, 3-3/4 in Flute Length, 0.386 in Dia x 1.375 in L Shank, Straight Shank, 118 deg Point, Radial Point, Right Hand Cutting Direction, HSS Cutting Edge, No Through Coolant, HSS, Uncoated, Applicable Materials: Alloy Steel, Carbon Steel, Low Carbon Steel, Gray Cast Iron, Nodular Cast Iron and Aluminum
- Bright finish adds lubricity and is ideal for drilling in non-ferrous materials like aluminum
- 118 conventional point for rapid penetration
- Reduced round shank for use in portable power tools