Welcome back to E&R Industrial - your premier industrial supply chain partner!
Cleveland® C09107 2550 High Helix Taper Length Drill, #43 Drill - Wire, 0.089 in Drill - Decimal Inch, 4-1/4 in OAL, HSS, Uncoated
Cleveland® C09107 2550 High Helix Taper Length Drill, #43 Drill - Wire, 0.089 in Drill - Decimal Inch, 4-1/4 in OAL, HSS, Uncoated
Manufacturer: Walter Surface Technologies
Brand: Cleveland®
Part #: CTD-C09107
MPN: C09107
CPN:
| Applicable Materials | : | Alloy Steel, Aluminum, Copper Alloy and Plastic |
| Cutting Depth | : | 2-1/4 in |
| Cutting Direction | : | Right Hand |
| Cutting Edge Material | : | HSS |
| Drill Size - Decimal Inch | : | 0.089 in |
| Drill Size - Wire | : | #43 |
| Finish | : | Uncoated |
| Flute Length | : | 2-1/4 in |
| Flute Type | : | Spiral |
| Material | : | HSS |
| Overall Length | : | 4-1/4 in |
| Point Angle | : | 118 deg |
| Point Type | : | Radial |
| Series | : | 2550 |
| Shank Size | : | 0.089 in |
| Shank Type | : | Straight |
| Type | : | High Helix |
Cleveland® Taper Length Drill, High Helix, Series: 2550, #43 Drill - Wire, 0.089 in Drill - Decimal Inch, 4-1/4 in Overall Length, 2-1/4 in Cutting Depth, Spiral Flute, 2-1/4 in Flute Length, 0.089 in Shank, Straight Shank, 118 deg Point, Radial Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Uncoated, Applicable Materials: Alloy Steel, Aluminum, Copper Alloy and Plastic
- Improved chip lifting in soft materials
- HSS provides good wear-resistance
- Bright provides a smooth, polished finish on the tool and it increases chip flow in softer materials such as aluminum, wood and plastic
- Spiral flutes are constructed of a higher flute angle to remove chips easier
- 38 deg helix