Welcome back to E&R Industrial - your premier industrial supply chain partner!
0 Items

Lyndex-Nikken PS-130E JIS Style Retention Knob/Pull Stud With P-9 O-Ring Lapped Face, M12 P-1.75 Thread, 60 deg, 0.43 in Dia Knob, BT30 Taper

Lyndex-Nikken PS-130E JIS Style Retention Knob/Pull Stud With P-9 O-Ring Lapped Face, M12 P-1.75 Thread, 60 deg, 0.43 in Dia Knob, BT30 Taper

Manufacturer: Lyndex-Nikken
Brand: Lyndex-Nikken
Part #: LYD-PS-130E
MPN: PS-130E
CPN:
Angle      :      60 deg
Flange Thickness      :      0.197 in
Flange to Angle Length      :      0.709 in
Flange to Knob Length      :      0.905 in
Knob Diameter      :      0.43 in
Taper Size      :      BT30
Thread Size      :      M12 P-1.75
Through Coolant (Yes/No)      :      Yes
Type      :      JIS Style

Lyndex-Nikken Retention Knob/Pull Stud, JIS Style, M12 P-1.75 Thread, 60 deg Angle, 0.43 in Diameter Knob, BT30 Taper, 0.197 in Flange Thickness, 0.709 in Flange to Angle Length, 0.905 in Flange to Knob Length, Yes Through Coolant

  • Class 4g 6g metric thread
  • Magnetic particle crack tested
  • Tensile and shear requirements per JIS 6339
  • All locations of the pullstud that make contact with ground spindle mechanism components are ground
  • Base of pullstud flange is ground to assure perpendicular alignment between pullstud and taper of toolholder
  • Ground pilot and tight pitch diameter tolerance help maintain accurate concentricity between threads and knob limiting the expansion or flaring of the small end of the taper

back To Top