SGS® 32591 V-Carb™ 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2 in OAL, AlTiN
SGS® 32591 V-Carb™ 55CR Center Cutting High Performance Positive Rake Single End Mill, 3/8 in Dia Cutter, 0.015 in Corner Radius, 1/2 in Length of Cut, 5 Flutes, 3/8 in Dia Shank, 2 in OAL, AlTiN
| Corner Radius | : | 0.015 in |
| Cutter Diameter | : | 3/8 in |
| Cutting Direction | : | Right Hand |
| Finish | : | AlTiN |
| Flute Type | : | Right Spiral |
| Helix Angle | : | 45 deg |
| Length of Cut | : | 1/2 in |
| Material | : | Solid Carbide |
| Number of Flutes | : | 5 |
| Overall Length | : | 2 in |
| Series | : | V-Carb™ 55CR |
| Shank Diameter | : | 3/8 in |
| Shank Length | : | 1-1/2 in |
| Shank Type | : | Weldon Flat |
| Type | : | Center Cutting High Performance Positive Rake Single |
V-Carb™ end mills set the standard for peak finish quality. These 5-flute, unequal helix tools feature unequal indexing and an ideal rake and relief combination for unmatched finishing capability. Available with a full selection of corner radii and ball nose configurations, the V-Carb™ portfolio is well equipped to handle your complex finishing requirements.
SGS® End Mill, Center Cutting High Performance Positive Rake Single, Series: V-Carb™ 55CR, 3/8 in Cutter Dia, 0.015 in Corner Radius, 2 in Overall Length, 1/2 in Length of Cut, 5 Flutes, Right Spiral Flute, 3/8 in Shank Dia, Right Hand Cutting, 45 deg Helix Angle, Weldon Flat Shank, 1-1/2 in Shank Length, Solid Carbide, AlTiN
- Unequal indexing, high helix and an ideal rake and relief combination for unmatched finishing capability
- The choice when peak finish quality is the requirement
- Enhanced corner geometry with tight tolerance corner radii
- Recommended for materials <= 45 HRc (<= 420 Bhn)