Welcome back to E&R Industrial - your premier industrial supply chain partner!
0 Items

SGS® 32616 V-Carb™ 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 4 in OAL, AlTiN

SGS® 32616 V-Carb™ 55CR Center Cutting High Performance Positive Rake Single End End Mill, 1/4 in Dia Cutter, 0.015 in Corner Radius, 1-1/4 in Length of Cut, 5 Flutes, 1/4 in Dia Shank, 4 in OAL, AlTiN

Manufacturer: KYOCERA SGS Precision tools, Inc.
Brand: SGS®
Part #: SGS-32616
MPN: 32616
CPN:
Corner Radius      :      0.015 in
Cutter Diameter      :      1/4 in
Cutting Direction      :      Right Hand
Finish      :      AlTiN
Flute Type      :      Right Spiral
Helix Angle      :      45 deg
Length of Cut      :      1-1/4 in
Material      :      Solid Carbide
Number of Flutes      :      5
Overall Length      :      4 in
Series      :      V-Carb™ 55CR
Shank Diameter      :      1/4 in
Shank Length      :      2-3/4 in
Shank Type      :      Straight
Type      :      Center Cutting High Performance Positive Rake Single End

V-Carb™ end mills set the standard for peak finish quality. These 5-flute, unequal helix tools feature unequal indexing and an ideal rake and relief combination for unmatched finishing capability. Available with a full selection of corner radii and ball nose configurations, the V-Carb™ portfolio is well equipped to handle your complex finishing requirements.

SGS® End Mill, Center Cutting High Performance Positive Rake Single End, Series: V-Carb™ 55CR, 1/4 in Diameter Cutter, 0.015 in Corner Radius, 4 in Overall Length, 1-1/4 in Length of Cut, 5 Flutes, Right Spiral Flute, 1/4 in Shank Diameter, Right Hand Cutting Direction, 45 deg Helix Angle, Straight Shank, 2-3/4 in Shank Length, Solid Carbide, AlTiN

  • Unequal indexing, high helix and an ideal rake and relief combination for unmatched finishing capability
  • The choice when peak finish quality is the requirement
  • Enhanced corner geometry with tight tolerance corner radii
  • Recommended for materials <= 45 HRc (<= 420 Bhn)
  • SGS 66784 Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_66784_Catalog.pdf
  • SGS 00988 RoHS https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_00988_RoHS.pdf
  • SGS 00988 SDS https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_00988_SDS.pdf
  • SGS 74649 Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_74649_Specification_Sheet.pdf
  • VIDEO LINK https://youtu.be/-nBE4nJr3aM

back To Top