SGS® 35594 S-Carb® 43CR Center Cutting High Performance Positive Rake Single End End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1-1/2 in Length of Cut, 3 Flutes, 3/8 in Dia Shank, 4 in OAL, Uncoated
SGS® 35594 S-Carb® 43CR Center Cutting High Performance Positive Rake Single End End Mill, 3/8 in Dia Cutter, 0.03 in Corner Radius, 1-1/2 in Length of Cut, 3 Flutes, 3/8 in Dia Shank, 4 in OAL, Uncoated
| Corner Radius | : | 0.03 in |
| Cutter Diameter | : | 3/8 in |
| Cutting Direction | : | Right Hand |
| Finish | : | Uncoated |
| Flute Type | : | Right Spiral |
| Helix Angle | : | 38 deg |
| Length of Cut | : | 1-1/2 in |
| Material | : | Solid Carbide |
| Number of Flutes | : | 3 |
| Overall Length | : | 4 in |
| Series | : | S-Carb® 43CR |
| Shank Diameter | : | 3/8 in |
| Shank Length | : | 2-1/2 in |
| Shank Type | : | Straight |
| Type | : | Center Cutting High Performance Positive Rake Single End |
The original symmetrical flute design features and engineered flute form that provides high performance results through a full range of machining conditions. These tools are designed for aggressive aluminum, non-ferrous, and non-metallic machining requiring a high level of material removal. The S-Carb® family encompasses the 2-flute series 47, 3-flute series 43, 3-flute advanced productivity rougher (APR) and 4-flute finisher (APF).
SGS® End Mill, Center Cutting High Performance Positive Rake Single End, Series: S-Carb® 43CR, 3/8 in Diameter Cutter, 0.03 in Corner Radius, 4 in Overall Length, 1-1/2 in Length of Cut, 3 Flutes, Right Spiral Flute, 3/8 in Shank Diameter, Right Hand Cutting Direction, 38 deg Helix Angle, Straight Shank, 2-1/2 in Shank Length, Solid Carbide, Uncoated
- Circular land allows for increased control at various speed and feed rates and reduces chatter
- Symmetrical end gashing for excellent balance at high speeds and aggressive plunging capability
- Open fluting for deep slotting and profiling
- Enhanced corner geometry with tight tolerance corner radii
- Recommended for materials <= 150 Bhn (<= 7 HRc)