SGS® 42649 V-Carb™ 55MCR Center Cutting High Performance Positive Rake Single End End Mill, 20 mm Dia Cutter, 2 mm Corner Radius, 50 mm Length of Cut, 5 Flutes, 20 mm Dia Shank, 100 mm OAL, AlTiN
SGS® 42649 V-Carb™ 55MCR Center Cutting High Performance Positive Rake Single End End Mill, 20 mm Dia Cutter, 2 mm Corner Radius, 50 mm Length of Cut, 5 Flutes, 20 mm Dia Shank, 100 mm OAL, AlTiN
| Corner Radius | : | 2 mm |
| Cutter Diameter | : | 20 mm |
| Cutting Direction | : | Right Hand |
| Finish | : | AlTiN |
| Flute Type | : | Right Spiral |
| Helix Angle | : | 45 deg |
| Length of Cut | : | 50 mm |
| Material | : | Solid Carbide |
| Number of Flutes | : | 5 |
| Overall Length | : | 100 mm |
| Series | : | V-Carb™ 55MCR |
| Shank Diameter | : | 20 mm |
| Shank Type | : | Straight |
| Type | : | Center Cutting High Performance Positive Rake Single End |
V-Carb™ end mills set the standard for peak finish quality. These 5-flute, unequal helix tools feature unequal indexing and an ideal rake and relief combination for unmatched finishing capability. Available with a full selection of corner radii and ball nose configurations, the V-Carb™ portfolio is well equipped to handle your complex finishing requirements.
SGS® End Mill, Center Cutting High Performance Positive Rake Single End, Series: V-Carb™ 55MCR, 20 mm Cutter Dia, 2 mm Corner Radius, 100 mm Overall Length, 50 mm Length of Cut, 5 Flutes, Right Spiral Flute, 20 mm Shank Dia, Right Hand Cutting, 45 deg Helix Angle, Straight Shank, Solid Carbide, AlTiN
- Unequal indexing, high helix and an ideal rake and relief combination for unmatched finishing capability
- The choice when peak finish quality is the requirement
- Enhanced corner geometry with tight tolerance corner radii
- Recommended for materials <= 45 HRc (<= 420 Bhn)
