Welcome back to E&R Industrial - your premier industrial supply chain partner!
SGS® 65179 Hi-PerCarb® 141K High Performance Triple Margin Jobber Length Drill Bit, 4.9 mm Drill - Metric, 0.1929 in Drill - Decimal Inch, 124 deg Point, Carbide, AlTiSiN
SGS® 65179 Hi-PerCarb® 141K High Performance Triple Margin Jobber Length Drill Bit, 4.9 mm Drill - Metric, 0.1929 in Drill - Decimal Inch, 124 deg Point, Carbide, AlTiSiN
Manufacturer: KYOCERA SGS Precision tools, Inc.
Brand: SGS®
Part #: SGS-65179
MPN: 65179
CPN:
California residents
| Applicable Materials | : | Cast Iron |
| Color | : | Copper |
| Cutting Depth | : | 5XD |
| Cutting Direction | : | Right Hand |
| Cutting Edge Material | : | Carbide |
| Drill Diameter Measurement System | : | Metric |
| Drill Size - Decimal Inch | : | 0.1929 in |
| Drill Size - Metric | : | 4.9 mm |
| Finish | : | AlTiSiN |
| Flute Length | : | 44 mm |
| Flute Type | : | Spiral |
| Material | : | Carbide |
| Number of Flutes | : | 3 |
| Overall Length | : | 82 mm |
| Point Angle | : | 124 deg |
| Point Type | : | Pyramid |
| Series | : | Hi-PerCarb® 141K |
| Shank Size | : | 6 mm Dia x 36 mm L |
| Shank Type | : | Standard |
| Through Coolant (Yes/No) | : | Yes |
| Type | : | High Performance Triple Margin |
SGS® Jobber Length Drill Bit, High Performance Triple Margin, Series: Hi-PerCarb® 141K, Metric, 4.9 mm Drill - Metric, 0.1929 in Drill - Decimal Inch, 82 mm Overall Length, 5XD Cutting Depth, 3 Flutes, Spiral Flute, 44 mm Flute Length, 6 mm Dia x 36 mm L Shank, Standard Shank, 124 deg Point, Pyramid Point, Right Hand Cutting Direction, Carbide Cutting Edge, Yes Through Coolant, Carbide, AlTiSiN, Copper, Applicable Materials: Cast Iron
- 3-margin design improves hole stability and size control while providing superior finish, roundness and cylindricity
- Self-stabilizing pyramid point design stabilizes the drill on contact with the workpiece
- Open flute structure efficiently transports chips while maintaining strength at high feed rates
- Sculpted gash allows chips to easily flow away from the drill center
- Recommended for materials <= 43 HRc (<= 400 Bhn)
